skip to Main Content
+351-936-934-295 @MikrotikTrainingCenter info@mikrotikland.com
MTCUME

MikroTik Certified User Management Engineer

prerequisite: MTCNA

This Course is designed to give the possibility to manage users in different type of connections such as: PPP, PPPOE, PPTP, L2TP. Also Implement PPP security with IPsec, learn more options of Hotspot.

You’ll also learn how to manage your hotspot and PPP network in professional way with powerful advantage when you start using MikroTik RADIUS server User-Manager application that provide great and successful ability to create new ideas and that is so important for the ISP’s and WISP’s at public areas to manage the user authorization and accounting using a friendly GUI interface.

Course Outline:

PPP

  • PPP Profile
    • Local and remote addresses
    • Incoming and outgoing filters
    • Address list
    • Change TCP-MSS
    • Use encryption
    • Session timeout
    • Rate-limit configuration
    • Only-one setting
  • PPP Secret
    • Service and Profile
    • Local and Remote address
    • Routes configuration
    • Limit Bytes In/Limit Bytes Out configuration
  • IP Pool
    • Set addresses ranges
    • Next pool options

PPTP, LT2P

  • PPTP and L2TP
    • Theory
    • Comparison
  • PPTP Client configuration
    • Client setup
    • Set profile
    • Dial on demand
    • Add default route and static routes
  • PPTP Server configuration
    • Enable server
    • Setup profiles
    • Add clients to PPP secret
    • Set static interfaces for clients
  • L2TP Client configuration
    • Client setup
    • Configure profile
    • Dial on demand
    • Add default route and static routes
  • L2TP Server configuration
    • Enable server
    • Set profiles
    • Add clients to PPP secret
    • Set Static interfaces for clients

PPPoE

  • PPPoE server and client
    • Theory
    • Usage environment
    • Comparison to other PPP protocols
  • PPPoE client configuration
    • Client setup
    • Select interface
    • Service name
    • Configure profile
  • PPPoE Server configuration
    • Enable PPPoE server
    • Set profiles
    • Add clients to PPP secret
    • Add Static interfaces for clients
    • Secure server by removing any IP address from PPPoE server interface
  • Encryption
    • Set profile without encryption
    • Set profile with encryption
    • Configure PPPoE client without encryption
  • Interface ECMP
    • Set ECMP routes for PPP interfaces

Bridging

    • L2TP and EoIP
      • Set L2TP tunnel
      • Set EoIP tunnel
      • Create bridge and add necessary interfaces to ports
      • Confirm you have Ethernet connectivity between remote nodes
    • L2TP and VPLS
      • Set L2TP tunnel
      • Set VPLS tunnel
      • Create bridge and add necessary interfaces to ports
    • L2TP and BCP
      • Set L2TP tunnel
      • Use BCP to bridge PPP interface
      • Add to bridge necessary interface
    • Multilink Protocol
      • Enable multilink by specifying correct MRRU settings
      • Disable mangle rules for MSS adjustment
    • MLPPP (optional)
      • Setup client and specify multiple interfaces for one client
      • Set PPPoE server with MLPPP support

IPSec

  • Introduction
    • Theory and concepts
    • Comparison to other VPN protocols
  • IPSec Peer
    • Use different authentication methods
    • IPSec exchange modes
    • Encryption and hash algorithms
    • NAT-Traversal
    • Lifetime and lifebytes
    • DPD protocol
  • Policy
    • IPSec protocol and action
    • Tunnels
    • Generate dynamic Policy
  • Proposal
    • Encryption and authentication algorithms
    • Lifetime
    • PFS
  • Installed-SA
    • Flush SA
  • Create IPSec between two routers with NAT
    • Set peer
    • Set policy
    • Set NAT rules
    • Confirm the secure link is established

Firewall

  • Firewall principles
  • Firewall Filter in action
  • Basic Address-List
  • Source NAT
  • Destination NAT
  • FastTrack

Firewall

  • Simple Queue
  • One Simple queue for the whole network (PCQ)

Tunnels

  • PPP settings
  • IP pool
  • Secure local network (PPPoE)
  • Point-to-point addresses
  • Secure remote networks communication (PPTP, SSTP)

Misc

  • RouterOS tools
  • Monitoring
  • Contacting support@mikrotik.com
Back To Top
×Close search
Search